bushnell northstar automated tracking system lens

#BUSHNELL NORTHSTAR AUTOMATED TRACKING SYSTEM LENS HOW TO#

This is the first step towards enjoying your stargazing experience, but if you don’t see the same image on your eyepiece, you must readjust and align the finderscope again. Do not move directly to the highest-powered eyepiece, as you still need some time to adjust to the sights.Īs a newbie, the low-power eyepiece is the best option as it delivers a vast range of views, and its bright image will help you easily locate the targeted object. The low-powered eyepiece will reveal the same image as the finderscope if you have assembled everything according to instructions. If you have done a decent job aligning the finderscope, a glance through the low-powered eyepiece will reveal your targeted object. So, when you complete the assembly of your telescope, you need to position the targeted object, such as the Moon, into the central point of your red dot finderscope. Once you get used to the Moon, you can move on to Mars, Mercury, Venus, and the other planets in our solar system. However, most stargazers start with the Moon, the closest to the Earth, appearing majestically in the night sky. Any bright planet or star in the night sky can be a great starting point. The first step to experiencing your brand-new telescope is identifying the object you want to view it with.

#BUSHNELL NORTHSTAR AUTOMATED TRACKING SYSTEM LENS HOW TO#

How To Experience Your Bushnell NorthStar Telescope In An Enjoyable Way? Start With The Low Power Eyepiece Remove the low-powered eyepiece for the high-powered one if you want to view other objects. If you want to use a Barlow lens, put this between the focusing tube and the low-powered eyepiece. This model comes with a Barlow lens which can be utilized to double or triple the magnification power of your telescope. Remember that the base power of every eyepiece can be identified only by the focal length of the objective lenses of the telescope. This will get you accustomed to the magnification lenses and be easy on your eyes. How To Select The Ideal Eyepiece?įor the very first use, it is advisable to use the lowest powered eyepiece, which is the 20mm lens. Now you have to tighten all the set screws so that all accessories are fastened onto the position and firmly secure.įinally, remove the objective dust cover placed on the open end of your telescope so that the entire diameter becomes visible. You can do this by carefully backing out the set screw of the eyepiece and placing it entirely over the focusing mechanism. There is a focusing mechanism inside the telescope where you must insert this eyepiece. Now you must assemble the low-powered or the high-powered eyepiece, depending on your application. Tip: You can identify the correct assembly point if you face the large end of the red dot finderscope with the open end of the telescope tube. Put the finderscope assembly along with the attachment nut bolts, then reattach the finderscope mounted bolts with the thumb nuts. You will find the attachment nut bolts of the finderscope inside the primary telescope tube. Step 3: Attach The Remaining Telescope Accessoriesīring out the red dot finderscope from the packaging of the product. The final step involves reattaching the thumb nuts to the primary bolt attachments, which should be implemented after the computerized star locator assembly and the primary telescope tube are assembled. Then you need to spread the legs of the tripod towards a comfortable distance.

Step 1: Setup Tripod And Accessory TrayĪt first, we need to locate the computerized star locator assembly and attach this to the tripod stand in an upright and balanced position. Therefore, attention must be given to the eyepieces, computer, and telescope. Then you need to identify all the parts to know when to attach each part.Īs this telescope relies on a precision optical system, you must be very careful while handling all the parts during assembly. Just remove all the components from the packaging and keep them in an organized fashion. How To Use The Bushnell NorthStar Telescopeįirst, you don’t need to use any tools to assemble the parts of your Newtonian telescope. The magnifying eyepiece, which uses high power, is best for viewing the Moon and other planets. These could be star cluster systems or huge galaxies emitting a continuous light array. The eyepiece that uses low power is most optimal for viewing very large and extended objects. There is a low-powered eyepiece and a high-powered eyepiece.

Bushnell northstar automated tracking system lens